Operating rules of gantry machining center

Release time:

2023-03-14 09:53

　　1. The operator should be familiar with and master the performance and characteristics of the gantry machining center machine. Ensure that the emergency stop switch can quickly and effectively function when an emergency occurs, and avoid injury accidents.

　　2. Wear labor protection equipment according to regulations, and it is strictly forbidden to wear gloves to operate.

　　3. When the equipment is working, do not touch the electronic switch with wet hands to avoid electric shock. Do not touch any moving parts with your hands.

　　4. Do not place tools or non-processed workpieces on gantry machining centers or moving objects.

　　5. The computer desk or work desk next to the machine must be sturdy and must not be placed on moving parts.

　　6. When up and down the workpiece, you should stop the machine first, and pay attention to keeping a proper distance between the workpiece and the tool. When the machine is running, please do not open the front door and left and right protective covers arbitrarily to avoid personal injury.

　　7. After the tool is set, please run DRY RUN first to make sure the program is correct.

　　8. When shutting down after a power failure or emergency stop, the three axes should be restored to their original mechanical positions.

　　9. Do not dismantle the travel switch or any related parts of the protection switch without authorization.

　　10. Before finishing work and leaving the machine, turn off the control power switch of the operation panel and the main switch of the electrical box. [3]

Recommended News

Various requirements for using Xinyongjin Lijia series

How to correctly choose fixtures for CNC machine tools

2020 CME China Machine Tool Show Invitation Letter

What are the characteristics of CNC milling machines